heres just the begining of a planer rastor contour... I have gone though it. See what you guys pick out as a problem.
thanks
Tree
'PROGRAM NUMBER :100
'PROGRAM NAME: GUITAR_TOP4.NC
'POST: SHOPBOT PRT
'DATE: THU. 02/07/2008
'TIME: 04:09PM
'T1 ENDMILL ROUGH, DIAMETER = 0.5, LENGTH = 5.
'
JH
'
'JOB 1 SLICE CUT PLANAR
'TOOL #1 0.5000 ENDMILL ROUGH
'INSERT FIRST TOOL
PAUSE 1
'
J2,18.6633,6.5565
JZZ0.1
MZZ-0.0389
MS,5.0115
N01M9810( SUBPROGRAM CALL )
'
JH
10'SUBPROGRAM OF 100
MZZ0.1
MS,9.7724
MZZ-0.0389
M3,18.6633,6.7254Z-0.0223
M3,18.6633,6.8944Z-0.0084
M3,18.6633,6.9788Z-0.0026
M3,18.6633,7.0306Z0.
M3,18.6633,7.0469Z-0.0003
M3,18.6633,7.0633Z-0.0017
M3,18.5633,7.1825
MZZ-0.0743
M3,18.5633,7.168Z-0.063
M3,18.5633,7.1534Z-0.0535
M3,18.5633,7.1389Z-0.0454
M3,18.5633,7.1244Z-0.0386
M3,18.5633,7.0953Z-0.0271
M3,18.5633,7.0662Z-0.0179
M3,18.5633,7.0372Z-0.0108
M3,18.5633,7.0081Z-0.0056
M3,18.5633,6.979Z-0.0021
M3,18.5633,6.95Z-0.0003
M3,18.5633,6.9216Z-0.0001
M3,18.5633,6.8918Z-0.0016
M3,18.5633,6.7174Z-0.014
M3,18.5633,6.6012Z-0.0242
M3,18.5633,6.4849Z-0.0355
M3,18.5633,6.3686Z-0.048
M3,18.5633,6.2524Z-0.0622
M3,18.5633,6.1361Z-0.0777
M3,18.5633,6.0198Z-0.0943
M3,18.5633,5.9036Z-0.1125
M3,18.5633,5.7873Z-0.1321
M3,18.5633,5.671Z-0.1532
M3,18.5633,5.5547Z-0.1756
M3,18.5633,5.4385Z-0.1996
M3,18.5633,5.3222Z-0.2253
M3,18.5633,5.2059Z-0.2522
M3,18.5633,5.0897Z-0.2805
M3,18.5633,4.9734Z-0.3107
M3,18.5633,4.8571Z-0.3425
M3,18.5633,4.7409Z-0.3759
M3,18.5633,4.6246Z-0.4109
M3,18.5633,4.5083Z-0.4476
M3,18.5633,4.3921Z-0.486
M3,18.5633,4.2758Z-0.5262
M3,18.5633,4.1595Z-0.5682
M3,18.4633,3.57
MZZ-0.7657