Good morning everyone,
I have made a modification to my Shopbot OEM dust foot. With normal wear and tear, the plastic became broken mainly at the screw areas for the skirt attachment. The rest of the unit was in good shape. So the digitizer was connected to the spindle and disassembled the entire foot to just the main piece. Double face taped this piece to the table and then used the digitizer to make a perfect perimeter file. First took a 3/4" piece of plywood and milled a prototype of the new outer ring to make sure it would fit. The two small pockets are for the Harbor Freight rare earth magnets. The prototype fit like a glove.