Our setup is a PRT w/router w/Agek upgrade. Today we lost y motion a number of times. Nothing different has been introduced recently. At first I thought it was jog speed related only...I was jogging at 14"/sec. So I made all motions move speed of 5"/sec and we still lost product due to loosing y. At the screen y continued to show motion but not on the table. After turning everything on/off all motion was regained. Can those of you that have been at this longer than I confirm that my symptoms are indeed a lost driver? Is it totally controll box related? Of course I will be intouch w/Dirk as well...but in the mean time any light on this would be greatly appreciated. TIA
Jon