Thank you all for the comments and accolades on the kitchen project. Let me try and answer some of the questions.
1. Counter top - corian
2. How long did eCabs work take - since this was my first big project there was a long learning curve. Overall with learning curve it took about 5 weeks.
3. The doors - every piece of this project including drawer boxes, drawer fronts, doors was done by me. The only thing I purchased was the crown molding.
4. Sheets of plywood - 121 total. This includes 3/4" finished maple, 3/4 hickory, 1/2" finished maple, 5/8" finished baltic birch, 1/4" hickory.
5. What is the Shopbot link - It is a piece of software from Thermwood that takes designs from eCabinets and creates G-code for the Shopbot to cut all your parts. I've attached some screen shots of the Link software. As with all software and computers, there is a learning curve. But what I have posted on my website are the results of that learning curve.
49131.jpg
49132.jpg
49133.jpg
49134.jpg
Thanks again everyone,
Don
www.dlwoodworks.com
Reply With Quote
