Can anyone please tell me how to move the second Z axis. I have tried MA and ZA . I am able to turn the spindle on but not move the Z.
Thanks,
Todd
Can anyone please tell me how to move the second Z axis. I have tried MA and ZA . I am able to turn the spindle on but not move the Z.
Thanks,
Todd
MA will move the second Z if you have your software setup for 4 axis. I forget where that is. Some one will chime in.
Try VD ?
Jack, you are correct.Ryan at tech support helped me out. I needed to turn on the A axis in the [values],[display values] and change the axis from 3 to 4. I changed mine to 5 since I have the indexer.(A & B axis).
Thanks,
Todd