I made this speaker stand from wood I harvested on our property. The legs are about the smallest thing I've ever made but required as much work to make as full sized table legs. I used one board 11" wide and 1" thick for this project and have several tons of nice oak left.

Bits: 1/2" end mill, 1/4 ball" nose, bottom cleaning planar bit. Aspire 9.5

Blanks: 4 finish material, 1 from scrap as a test.
TinyTable5.jpg
Being cut on the indexer
TinyTable4.jpg
One leg sanded, three out of the indexer
TinyTable3.jpg
Finished table (6" tall, 12"x12" top)
TinyTable2.jpg
Underside
TinyTable1.jpg