KeyHole Hangers

[jimmya]

I’ve goggled this Keyhole Hanger (see picture) and all I can find is two screw hangers. I’ve got to install 10 Cedar signs on a Golf Corse, to be mounted on 4x4’s. 6 signs are 12x12x1-1/2” and 4 are 20x30” I was going to put 2 brackets per sign, maybe there is a better way?
Thanks for Your help
Jimmy

Keyhole Bracket.jpg

[mick_martin]

I just use the gadget function in Aspire to create key holes in my signs.

Mick

[bleeth]

Jimmy:

I wouldn't use those. The problem is the signs will be able to lift right off and if you didn't use two of them your sign would swivel in the wind.

Better to use a couple L brackets on the back and screw them tight if you dont want to just face screw them. Aluminum L brackets can be made out of some angle very easy and stainless steel screws will not corrode over time. Don't use steel!!