Let's Talk ShopBot  

Go Back   Let's Talk ShopBot > ShopBot Specific > Variations & Modifications of ShopBots

Reply
 
Thread Tools Display Modes
  #1  
Old 04-05-2012, 02:37 PM
Jerry Stanek jerry_stanek is offline
Senior Member
 
Join Date: Dec 2007
Posts: 1,663
Default custom files

I made a little program to offset a cross hair laser how do I make it a custom file like the c2 or c3
Reply With Quote
  #2  
Old 04-05-2012, 04:17 PM
srwtlc's Avatar
Scott Worden srwtlc is offline
Senior Member
 
Join Date: Dec 2000
Location: Thorp, WI
Posts: 1,993
Default

Easiest way is to go to 'Cuts/set up custom cut' in SB3 and paste your code in the middle clear section, put a name at the top as stated in the instructions and then Save as with a number of a open slot. Be careful what one you choose so that you don't over write one that you or SB uses.

Close SB3 and restart it, and it should show in the list unless it's a high number, then it may not be on the list, but you can still call it up with CN and the number that you saved it as. Example, Custom13.sbc would be CN13.

You can also just open one of the customXX.sbc files, cut and paste your code, change the description and save as to another number.
__________________
Scott

"Four wheels move the body. Two wheels move the soul."

"Those who trade Liberty for Security have neither"
John Adams

"Those who hammer their guns into plows, will plow for those who do not."
Thomas Jefferson
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 10:13 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright © 1999 - 2012 ShopBot® Tools, Inc.