I am trying to cut half-spheres out of a 1" piece of material. 12 "pockets" in a row, each 1" diameter, by 1/2" deep (a perfect half sphere)
I can model it with a 2 rail sweep or with the modeling tools (-90 degree, round shape, depth of .5").
The problem is, when I do a tool path, the upper edge of the pocket is very irregular, and rough.
Also, I would like to cut the pocket starting at the outer perimeter and cut in a circular path working deeper and towards the center, but it will only let me start in the middle and work my way out.
Help!
AJC