Need a vector of the cable guide for the PRTAlpha96

[andyb]

Hey Guys,
Does anyone have a vector for the cable guide for an PRTAlpha96? I know it would be simple to draw one up but just don't have time right now.

Andy B.

[steve_g]

Do you mean the arch? If so... please replace it with energy chain. EBay always has good deals on it. When my arch broke, a series of unfortunate events caused me to damage my main board... E chain is much cheaper!

SG

[andyb]

Steve,
Yes the arch. I have a piece of lexan left over from a job that would work great. Enough to cut 2. E-chain will be an option in the future.

Andy B.

[MogulTx]

I looked for my sketch of it. Can't find it. Probably because I looked at it, and the echain I had had on the previous machine, and I called shopbot and ordered the new machine an echain instead.

I have had both, and I like the echain a LOT more. If you have enough room, I also like the echain for the x axis. Currently, with a 5 x 10 in my small shop, I don't have enough room for echain on my X...

YMMV.