The heat bed perfectly fitted in 3mm deep pocket
Here is a small video of autocalibration:
https://www.youtube.com/watch?v=Ado_kLS ... e=youtu.be
I think i have to install some round (spherical tips) over the magnet to get a good grip on ball...
I left woodwork due to office work.
DELTA-1 turned black ... MDF absorb color better say it drink color...so did a primer of (50%Wood glue+50% water mixture)..after dryout just spray paint...
I left woodwork due to office work.
Today was the first test print... PLA 215 Nozzle and 75C bed temperature...used white glue stick. The raft was detached but the brim was solidly adhered to the bed till the end of the print..
http://youtu.be/Ik7lkaavRuA
some photoes
I left woodwork due to office work.
Congrats on first prints, looks like you are on the right track with your system. Well done. Russ
AKA: Da Train Guy
Thanks Russ... You are a Train guy and you can make lot of parts with 3d printer.. here i made some timing belt tensioner for my 3D printer.. machine making machine
I left woodwork due to office work.
Exactly - perfect for modeling stuff! Russ
AKA: Da Train Guy
OMG... what a beauty... you are already doing with 3d printer!!!!
I left woodwork due to office work.
Nice!!
Both of you
scott P.
2013 Desktop/spindle/VCP 12.0*
Maine