If i have a template that has 125 holes, and need to change the size of all of them is there a way to easily do that? For example for one piece all the holes may need to be .550, for another all the holes need to be .489, and so on.
Thanks
If i have a template that has 125 holes, and need to change the size of all of them is there a way to easily do that? For example for one piece all the holes may need to be .550, for another all the holes need to be .489, and so on.
Thanks
Select all
Using the offset tool, offset in/out one half the diameter change,
select "delete original"
Gary Campbell
GCnC Control
GCnC411(at)gmail(dot)com
Servo Controller Upgrades
http://www.youtube.com/user/Islaww1
"We can not solve our problems with the same level of thinking that created them"
— Albert Einstein
If you're using one of the Vectric programs, another option is to use the Circle Resizer gadget. It works really well.
https://gadgets.vectric.com/V9/circle_resize.html