Let's Talk ShopBot  

Go Back   Let's Talk ShopBot > Applications and Techniques > Developers > Archives Developers

Thread Tools Display Modes
Old 03-23-2005, 03:14 PM
Posts: n/a

Thanks Normand
You are correct about the mounting. I mounted the scanner on the z, but it could be mounted on the y carriage and moved in the x axis.
The actual scan took about 15 seconds at 2 ips.
On my slow computer (450 MHZ), processing the scan image takes about 90 seconds. About another 2-3 minutes to trim up the image to the desired elevation/width etc, and create the output files.
Thanks again.
Old 08-23-2005, 07:05 PM
Wayne Painter wayneo is offline
Join Date: Jan 2004
Location: Quality Products NorthWest, LLC, Juneau AK
Posts: 62

Hi Thomas,
Anything new developing in this area lately? I am also very interested in your developments.....
Would like to hear more....

Old 05-03-2006, 03:08 PM
Jay Pengilly jay_p is offline
Senior Member
Join Date: Feb 2004
Location: University of Idaho, Moscow ID
Posts: 123

Are you still around Thomas, and is there any new development in the laser scanner?

Old 12-03-2006, 11:07 AM
Normand Blais normand is offline
Senior Member
Join Date: Jan 2004
Location: montreal quebec
Posts: 105

another 3d laser scanner pipeline. not as good as a cyrax http://www.rob.cs.tu-bs.de/david/index.html

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -4. The time now is 10:18 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
Copyright © 1999 - 2012 ShopBot® Tools, Inc.