Post Processor in CPP 8.7

[terryjones]

I have just purchased CPP (8.7.7) this week. In the tool path section there is a pull down menu to set your Post Processor. There are 3 ShopBot links; Shopbot, Shopbot_Basic, and Shopbot_IN. I have a PRT with 4G upgrade and no tool changer. Can someone tell me the correct choice?

[dmidkiff]

Terry, I have the same version of CCP and I was using SB Basic. My SB was a 2001 PRT with no upgrades. Don't have new one set up yet so don't know if it will be the same. Hope this helps.

[terryjones]

Dave,
Thank you for the information. Just curious, what determined your choice?

[larry_high]

Terry you have PM

[terryjones]

Larry, PM did not come through. email me please. tljrns@cableone.net.

[dmidkiff]

Terry, I was having a run time error and Ryan found a bug in the PP and had me change an O (OH) to a 0 (zero). I don't remember which PP I started with but Ryan suggested that I change and then. Sorry I can't be more help. Should have taken notes. Email Ryan and he will help you out.

[terryjones]

Dave,
Thanks for the input. Larry suggested to save the DXF files and batch export with the Gadget in Aspire. Ryan has a video to complete the task. Reviewed it a couple of times and it worked great.