Results 1 to 7 of 7

Thread: Need opinions on capabilities of indexer

  1. #1
    Join Date
    Jul 2010
    Location
    Mohawk,NY
    Posts
    19

    Default Need opinions on capabilities of indexer

    I have a PRS ALPHA model with the indexer mounted along the X axis. The indexer is the ShopBot model with the supplied VEXTRA T-10 drive motor. My question is this; does this motor have the ability to handle a 8 X 8 by 7 foot post for machining? If not what motor would be a suitable replacement?
    I have learned so much from the experts here and the information shared. Wanted to say thanks to all and that it is very much appreciated.
    Charlie
    PRS Alpha 96x60x12 with Indexer
    Aspire 10
    Rhino5 with Orca3D

  2. #2
    Join Date
    Mar 2006
    Posts
    7,832

    Default

    I've done 12" wide by 8' long columns with no problem
    Attached Images Attached Images
    Words of Wisdom:
    “Words that sink into your ears are whispered…… not yelled”
    “The biggest trouble maker you’ll probably ever have to deal with, watches you from the mirror every morn’n”
    “The only difference between a rut and a grave is the depth”
    -----------
    Just remember...when it's time for the hearse to pull up..there's no luggage rack on top!
    -----------
    The beauty of the Second Amendment is that it will not be needed until they try to take it...Thomas Jefferson

  3. #3
    Join Date
    Jan 2015
    Location
    Palm Coast, FL
    Posts
    193

    Default

    Quote Originally Posted by woodstripboats View Post
    I have a PRS ALPHA model with the indexer mounted along the X axis.
    If you have a couple of pictures showing where and how your indexer is mounted, I really like to see them. Thanks.
    PRS Alpha 96-60 ATC
    16.9hp Republic Regenerative Blower
    Aspire 8.5
    eCabinets with ShopBot Link

    https://www.facebook.com/SyzygyWoodworks/

  4. #4
    Join Date
    Jul 2010
    Location
    Mohawk,NY
    Posts
    19

    Default

    Thanks for your reply. My concern was the weight of the 6x6 post seems heavy for that T-10 indexer motor. I had my indexer mounted on the Y axis but needed to change it to the X axis because of these long post I need to make.
    I will post a pic soon.
    PRS Alpha 96x60x12 with Indexer
    Aspire 10
    Rhino5 with Orca3D

  5. #5
    Join Date
    Jul 2010
    Location
    Mohawk,NY
    Posts
    19

    Default

    P1250421.jpg Turning a 11'-4" post ...
    Attached Images Attached Images
    PRS Alpha 96x60x12 with Indexer
    Aspire 10
    Rhino5 with Orca3D

  6. #6
    Join Date
    Nov 2007
    Location
    NovaScotia
    Posts
    275

    Default

    Turning 10" x 11.5' pine posts on 6" indexer
    Attached Images Attached Images

  7. #7
    Join Date
    Mar 2009
    Location
    n/a, Vancouver BC
    Posts
    68

    Default

    Very nice set up! I wish I could mount that on my machine but alas there isn't the room. What are there specs for the geared stepper motor that drives it? Backlash?

Similar Threads

  1. Board capabilities?
    By jsolos in forum Variations & Modifications of ShopBots
    Replies: 5
    Last Post: 05-03-2013, 11:58 AM
  2. I have a question about indexing capabilities
    By steve_g in forum Indexer
    Replies: 4
    Last Post: 04-17-2010, 10:27 AM
  3. Grayscale - to - 3D capabilities...
    By john_l in forum VCarvePro and PhotoVCarve
    Replies: 17
    Last Post: 03-29-2007, 08:30 PM
  4. Z axis capabilities
    By nickem@geowood.com in forum Archives2006
    Replies: 9
    Last Post: 01-22-2006, 06:31 PM
  5. Capabilities of Part Wizard 2.0
    By jcrwhiteriver in forum Archives 2005
    Replies: 5
    Last Post: 01-03-2005, 07:36 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •