First off - George, beautiful job! Good for you for not cheezing out and just cutting it with an 1/8" ball. Plus, an extra salute for creating a 3D file yourself from the vectors. It takes planning, persistence and a whole lot of patience not to pull the plug on something like this...

Now...

Quote Originally Posted by ironsides View Post
This time, I would like to make a few bucks on it.
If you actually want to turn a profit, my advice would be to make a silicone rubber mold of it and mess around with cold cast bronze or other room temp curing urethane plastics. The ShopBot is a perfect mold master making machine. The idea with the ShopBot and moldmaking, is to multiply yourself & ultimately your efforts.

50+ hrs @ $10/hr = $500 (Let's say you could sell it for that) That's not making a profit...and it is a poor labor exchange rate at best. Something to consider...

-B