How much space

[lemic_ray]

Hi guys,

I'm about 60 days from ordering my PRS standard 96 48.

I've just poured and cut expansion joints on my new shop floor.

13 x 24 will be the usuable shop space, there is a seperate mechanical room and a room for the air compressor and dust collector that is not included in the shop space.

I am trying to layout cabinetry and a few other shop tools, BUT..
I have no idea on how much acess room is needed around the ShopBot.

I'm assuming I will want about 12' open floor in front of the machine for loading and faced toward the bay door.

ANY suggestions would be apreciated.

Ray

[knight_toolworks]

I want at least 2.5' on each side. 3 to 5 on the front.

[gc3]

...if you are going to cut flat panel parts you need room to load sheets easily, at least 6' from machine front.


GC