knight_toolworks
08-27-2010, 02:39 PM
Well more about how to do the top. Ok I am making a vac box 2'x4' to cut some .03 lexan about 48 parts. the thing is I have to score the parts in several places so those points need support so they don't sag. I just need to know what is the best way to cut the holes/slots for vacuum to get the best hold.
the part is about 2.5"x6.5" .03 lexan so it is very thin and flexy.
here is the pdf file
http://dl.dropbox.com/u/1939753/5.5_%20three_fold_backflap_tester.pdf
http://dl.dropbox.com/u/1939753/sample.jpg
http://dl.dropbox.com/u/1939753/5.5_%20three_fold_backflap_tester.pdf
the part is about 2.5"x6.5" .03 lexan so it is very thin and flexy.
here is the pdf file
http://dl.dropbox.com/u/1939753/5.5_%20three_fold_backflap_tester.pdf
http://dl.dropbox.com/u/1939753/sample.jpg
http://dl.dropbox.com/u/1939753/5.5_%20three_fold_backflap_tester.pdf