coach
09-01-2010, 07:18 AM
Hi guys, I have been trying for 2 days to program a file. I was on Vectric forum and
Tony suggested aspire for the file that customer sent me.
If anyone can toolpath this for me so I can cut it on the bot I will gladly pay. The part has some 3d but Tony said it is mostly 2d.
It is from 3" foam and a left and right part approx. 34 1/2 x 12 1/2 and
a total of 20" in Z. If anyone wants the job phone Dave at 321 446 0568.
Thanks,Dave
Tony suggested aspire for the file that customer sent me.
If anyone can toolpath this for me so I can cut it on the bot I will gladly pay. The part has some 3d but Tony said it is mostly 2d.
It is from 3" foam and a left and right part approx. 34 1/2 x 12 1/2 and
a total of 20" in Z. If anyone wants the job phone Dave at 321 446 0568.
Thanks,Dave