shopbot PRT and Vcarve pro

[spotlight3d]

i know this question has probably been asked but i cant find an answer when i search

i have a shopbot PRT standard

and i upgraded to V carve pro 5.5 and i cant find a standard post in the vcarve list for the PRT

there are several but none of the just shopbot arcs inch
by themselves just drill posts and ATC posts and metric etc
also several PRS posts

can someone help a frustrated fellow please

thanks

[burchbot]

This is from the vectric forum
ShopBot Owners:
If you have a ShopBot, this release has some new ShopBot post processors provided by ShopBot. To avoid confusion, when you run the patch program it will move ALL your current post processors into a new folder under the PostP folder called “c:\Program Files\VCarve Pro 5.0\PostP\ShopBot_Orig” . If you have modified your original ShopBot post or just want to return to your original, just copy it back into the PostP folder after the patch has run.
Dan

[road_king]

The same thing happened to me when I upgraded my Aspire version. I copied the file and now all is well!!

[spotlight3d]

thanks guys problem solved