eliminator chuck

[sawkerf]

does anyone know if there is an eliminator chuck for the 3 1/2 hp milwaukee router

[myxpykalix]

Kip I asked on our legacy forum, however it is not nearly as popular as this one so it may not yield an answer for a day or 2. We use the eliminator chuck on our legacys with no real issues although they are not run nearly as long as you might with the shopbot. The mechanical issues and runout, ect I will leave to the experts to answer. Since i don't monitor that group much anymore here is the link for you to check the answer to your question:
http://groups.google.com/group/legacy-ornamental-mills
good luck:):D