help! need to find a supplier for ultra-light MDF

[smiley]

I need to find a supplier in missouri or nearby states for 5'x10' ultra-light MDF or turpan , anyone know of a supplier ? i have tried local cabnet shops and major wood suppliers in my area, any help would be greatly appreciated.

[rww]

I haven't been able to fine any in 5x10. I buy 4x8 and cut to fit the zones on my table. Let me know if you need a supplier for 4x8.

[smiley]

I think i have found a supplier for 4 x 8s op hardwoods in springfield mo , who is your source please , and thanks for the response
smiley

[zeykr]

Cedar Creek has a location in Springfield. I can sometimes get it from them here in NWA but it's pretty spotty. Seems they don't stock it all the time, but occasionally have a few sheets left over from someone else's large order. Think we got a sheet from Hogan Hardwoods once also.

Have one sheet of 18mm 5x8 trupan on shelf if that would do you any good. I cut 4x8 to fit zones like rww and seal the edges to reduce vacuum bleed over to other zones.

[curtiss]

http://www.schallerhardwood.com/

A few Missouri locations. Trupan and a lot of other stuff...

[smiley]

thanks i will give them a try

[smiley]

tried ceader creek they said they couldn't get it

[kern]

Smiley, I got my 1/2" 4 x 8 Trupan from Liberty Hardwood in Des Moines, Iowa. They are located in 9 midwestern states. I see that their web site is under construction, but they do list a phone number 888 908-0852. Kern

[rww]

I think all of my suppliers are mentioned above. Hogan Hardwoods doesn't have the trupan brand but I have used there ultra light mdf of another brand and it works just fine.

[smiley]

just want to give a big thanks to all the shopbotters who responded , thanks to you esp Curtis an Ed . Schaller Hardwood Supply in marrionville has 6 sheets 5 x10 turpan ultra light in stock. thanks again everyone for your help