View Full Version : Aluminum Gear Plate - More metalworking on a ShopBot Buddy
TNW Precise Machining
04-06-2011, 06:00 PM
Hi,
I wanted to share these pictures with you. The Gear Plate is for a customer in New Hampshire. It is 15"L x 4"W x 2"H and milled from 6061-T6 grade aluminum on a slightly modified ShopBot Buddy 48. All dimensions are within 0.005" or better. Top and bottom are parallel within 0.002".
Cheers
Dan
www.tnwprecisemachining.com
fozzyber
04-06-2011, 08:24 PM
nice work, what bit , speed , feed, and how much post clean up.
Looks like it was blasted post machining.
bleeth
04-06-2011, 08:42 PM
Very very nice Dan.
An inspiration for the SB gear boxes I am working on!
Brady Watson
04-06-2011, 10:02 PM
It's beauty-ful! :D
Very nicely done!
-B
TNW Precise Machining
04-07-2011, 01:50 PM
Thank you for your comments gentlemen. Please find a link to a video of one of the slots in the Gear Plate being cut. That will give you an idea of the feedrate. Cutter is 1/2" carbide spinning at 10 000 rpm.
http://www.youtube.com/watch?v=LWBjnmhDJiw
Will have more info about clean-up of the part once it has been cut in my next post.
Cheers
Dan
Brady Watson
04-07-2011, 01:57 PM
What are you running for CAM? Looks like MasterCAM generated or ???
-B
MogulTx
04-07-2011, 04:29 PM
Daniel-
So you created a lowered splash pan area below your regular table height?
Are you cooling with a commercial coolant?
This is a very interesting project. And the final product looks awesome.
michael_schwartz
04-07-2011, 07:02 PM
Looks very professional, and the tolerances are quite impressive.
More inspiration to venture beyond "woodworking"
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.