Logitech rumblepad2

[hunterland]

Would any one be using the rumble pad 2 controlller for running there prs standard and be willing to share there set up for the control keys I would appreciate it . Thanks in advance Don Hunter

[myxpykalix]

see this post, a couple posted there:
http://www.talkshopbot.com/forum/showthread.php?t=12682

[jerry_stanek]

I just started using mine and I used the program that Jack pointed to.

[bob_s]

I use mine every day with the same set up. Just be careful where and how you put the controller down. I found that you also need a clear view of the computer screen, so that you can verify that the Bot is going to do what you think you told it to do, and not some other random task. There was no skin lost in that experiment, just a new bit and a piece of 4/4 beech, but it has sure made me work a little more cautiously! I can now see my monitor from the far side of the Bot.

It is a great addition to the Bot, especially for running the C2 Z-zero routine in the exact spot you need it. To do this program a rumblepad button for the "escape" key another to call C2 routine and an "enter" key. I use the left side front buttons to call Page Up and Page Down to control my Z when in the K "keyboard shortcut" control menu

[hunterland]

Thanks Guys I downloaded the file and will see if I can get it to work . THanks Don:)