lowceiling

[coach]

finally in the new shop. machines wired in. I placed the bot under an existing mezanine. the over head height is 7'. Having issues with the dust extraction hose getting in the way. Any ideas or gadgets to make this work.

[bob_dodd]

David I attached metal studs on the rear of gantry for both vac hose and wires , This has worked for me , as I have 6" 6" where my machine is located Bob

[Gary Campbell]

Dave...
Some info for you here: http://www.talkshopbot.com/forum/showthread.php?t=483

[meatbal80]

I might have a little more than 6' 6", i use a swing arm set up. I would have used a ball joint hung from the ceiling but the height problem is from the over head garage door.