Z-Plate X axis Zero Routine

[archis]

Does anyone have a routine that can be used to set the x axis with the Z zero plate? This would come in handy for certain tasks.

[myxpykalix]

I have seen some guys take a square of aluminum and make a "Super Z" I believe its called where you can set x,y,and z. I didn't like the design because its meant to set your material Z to the lower left corner and i set mine always in the center. Do a search for "super z" i think it was called.

[wberminio]

Try this
http://www.iedu.com/DeSoto/SuperZero/

I have it and it really does work

[taskins]

Here's a routine that will ceter the x,y axis and zerothe Z. I use an aluminum plate with a piece of 2" cooper pipe union. There's lots more info on the forum. I forget who posted this orginally