is this a 3d file or a 2d?

[knight_toolworks]

I was given this file and sine the customer did not draw it they can't convert it. it is a rino file but it should be 2d since it is just 2d plywood cutting can someone check and convert it for me?

http://dl.dropbox.com/u/1939753/Builder%20boards%20II%20-%20Jack%20Mckee.3dm

[Brady Watson]

Attached in EPS format.

-B

[gc3]

I was given this file and sine the customer did not draw it they can't convert it. it is a rino file but it should be 2d since it is just 2d plywood cutting can someone check and convert it for me?

http://dl.dropbox.com/u/1939753/Builder%20boards%20II%20-%20Jack%20Mckee.3dm

nice file...care to share what it is

a model or full scaled building?

[knight_toolworks]

it's a kids size house. it's from a book and I guess as long as you don't change it you can sell it. there are better designs out there s this one you have to cut pieces up to make it all work

[knight_toolworks]

thanks brady. I want to cut this as fast as possible but I am thinking one pass and the parts would fly so it may be a two pass to make sure the lass pass is light pressure.