Can Food Storage

[shcsbaker]

Saw this the other day and was wondering if anyone had plans they would like to share. Is it possible to create a plan from a pic?

Thanks,
Kevin

[myxpykalix]

this looks fairly simple to do. get yourself a couple cans for perspective and you should be able to do this in 10 min.:D


are you kevin baker the navy sailor a previous member?:D

[shcsbaker]

Jack -

yeah one in the same.. I never change my email on my last account, so I couldn't get my password, so I created a new account

[Coleman Becker]

i will work on this tonight and model it in google sketchup

[adrianm]

Straight 2D surely?

[Brady Watson]

This is not that difficult to draw & toolpath. In fact, it is an excellent exercise that will hone your drawing skills. I would encourage you to figure it out on your own...rather than 'can I get that file' - because you will be rewarded with the knowledge of how to draw other similar parts...and this will build both confidence and your business.

Just sayin'...

-B

[gundog]

This is not that difficult to draw & toolpath. In fact, it is an excellent exercise that will hone your drawing skills. I would encourage you to figure it out on your own...rather than 'can I get that file' - because you will be rewarded with the knowledge of how to draw other similar parts...and this will build both confidence and your business.

Just sayin'...

-B

I agree with Brady try and do it yourself and if you get stuck post a question or two here and someone will help for sure. What software are you using for your Cad drawing? That will help when you have questions. If you use a version of Vetrics software I may be able to help I am not an expert but I could help you on drawing that project.

I would replace the MDF they use for ramps with acrlic or plexi glass so you can read the can label because unless you only have one type of can good you would want to know what is stored in the rack, or maybe just a window cut in the side.

Mike