PDA

View Full Version : pinion supplier


fozzyber
10-06-2011, 10:58 PM
Called SB today to order some pinion gears, 20t 1/2" bore.... $50ea.
Ouch. $200. Sorry but I got to look for another supplier on this one.
Any suggestions....?
gc3
10-07-2011, 08:11 AM
http://www.bostongear.com/smartcat/ss_app/d_srchframe.asp?cntry=United+States&isSrch=-1&from=&vid=15,100,3,0&code=bostongear
jerry_stanek
10-07-2011, 09:22 AM
what pitch are the gears
fozzyber
10-07-2011, 10:02 AM
20t 20pitch 1/2 bore" 20 pa
jerry_stanek
10-07-2011, 10:21 AM
Have you tried Mcmaster carr
robtown
10-08-2011, 10:16 AM
I tried the McMaster Carr route. Gears were cheaper but I wasn't 100% certain they were exactly correct, AND when they arrived they did not have the threaded holes for the grub screws, so to use them I would've had to a. pay a machine shop to drill and tap, or b. do it myself having to purchase a tap and probably a bit.

I relented, ate the mcMaster Carr purchase, and ordered from SB. Slid em on, tightened it all down, and was back to work.
ron_moorehead
10-08-2011, 11:01 AM
If it helps I got one gear from SB in a box with the Company name of Browning and a part number of YSS2020X.5512 EN6415. Looks like Browning is part of Emerson Power Transmission.