bruce_taylor
10-19-2011, 09:55 AM
I have a job to cut some MDF doors for a guy doing mobile home renovations, They intend on painting them. I will only be cutting the mdf. I am going to invest in the insert tooling for this as it seems to be a long term type of job. What works best for you guys already cutting these. Best place to order the tooling from? Any profiles/ types of door to avoid.Looking for one pass Profile and cut out with 3/8 compression. Any tips tricks would be appreciated. I"ll be using 3/4 ultra fine MDF with liner one side. 5X8. My spoilboard is presently 4x8 I'll be enlarging it to 5 footwide. Thanks for the help