C. Pile
11-15-2011, 02:09 PM
Hello,
I am more or less new with shop bots and I believe I am having problems with the accuracy of the x-axis. For example, if I was trying to cut a circle that is directly in the center of my material it comes out off center(roughly 1 - 1/4" only in the x) the Y is fine. The table/gantry is square; she is cutting square too (although, again everything is shifted in the x-axis)- checked and double checked. Also, she seems to zero herself spot on. Despite all that, I could be doing something wrong, I am not familiar with common shop bot troubleshooting.
Any advice will help.
Thanks,
Cody
I am more or less new with shop bots and I believe I am having problems with the accuracy of the x-axis. For example, if I was trying to cut a circle that is directly in the center of my material it comes out off center(roughly 1 - 1/4" only in the x) the Y is fine. The table/gantry is square; she is cutting square too (although, again everything is shifted in the x-axis)- checked and double checked. Also, she seems to zero herself spot on. Despite all that, I could be doing something wrong, I am not familiar with common shop bot troubleshooting.
Any advice will help.
Thanks,
Cody