stile and raile cutters, metric

[coach]

I saw metric cabinet door router sets for sale. I cannot remember where but have called around with no luck.
What do you guys do for flat panel, slile and rail doors. The 1/4" plywood is approximately 3/16" thick.

any help would greatly appreciated.
Thanks, Dave

[bleeth]

If it's shaker style do it on the table saw.
Otherwise here is another option:
http://www.mlcswoodworking.com/shopsite_sc/store/html/smarthtml/pages/rail_and_stile_router_bits1.html

[michael_schwartz]

Bridal joints cut on the tables saw with a tenoning jig. This joint is fast and easy and far superior in strength to unreinforced cope and stick, or stub tenons.

Run a groove using your favorite method.

[srwtlc]

http://www.eagleamerica.com/product/vp15-1051/pc_-_door_construction

http://www.infinitytools.com/Plywood-Slot-Cutter-Router-Bit-Sets/products/1204/

[copcab]

1/4 inch hardwood ply on an MDF core is just rthe right thickness for your stile and rail set. Maybe .23 inches.