Laptop stand for my Buddy

[Mike Kelly]

Couldn't take using a stool or my table saw to hold the laptop for the Buddy.
20-30 minutes later and all is better.

[myxpykalix]

Let me ask a dumb question....is your laptop stand attached to your carriage?

If so, what happens when the laptop is moving 5 feet away from you anbd you need to hit the spacebar, or need to increase the speed, or make some type of adjustments on the fly?

I think its a good idea just not connected to the moving carraige:D

[billp]

Jack,
On a Buddy the table moves, not the gantry.....Nice job Mike...

[jerry_stanek]

He said it is a Buddy. The table moves not the gantry

[COBOB]

I like it, nice job. Hope you don't mind if i use that idea. Really nice. I sure would like to see a closeup of that clock on the wall.
Bob

[myxpykalix]

Well then that makes sense:) I'm not familiar with that model, besides i said it was a dumb question!:D:eek:

[jerry_stanek]

I guess Bill was posting while I was typing

[curtiss]

Does it come with a coffee cup holder and a mouse pad attachment for those who are not handy with fingers ?

[Mike Kelly]

Robert

Here is a close up pic of the clock. I did this with a Fireball V90, before I got the Buddy.
This was not my design If you want more info on it go to http://alan-parekh.com/ he also has a multimeter clock that I've done (partially)
Alan sells the electronic kits to make the clocks, and the CAD files are free.


Tell him I sent ya

Mike Kelly
Moose Jaw, Sask



I like it, nice job. Hope you don't mind if i use that idea. Really nice. I sure would like to see a closeup of that clock on the wall.
Bob

[COBOB]

Thank you. He has some cool stuff.
Bob