Could this be used in for a BradyVac?

[VanIslanddan]

I came across this on a surplus site, I have no experience with Vacuum systems but understand the advantages. I will need to ask an electrician if I have enough power and if a phase converter will work. I only have 2 phase.
It is a bit of a leap of faith as there is no history on the blower.
Thank you
Dan

Blower with a Lafert Motor
Type: AM112MBA2
Volt: 208 230/460
Specifications:
SCL 07-MS-7.5-3
7.5 HP
208-230/460-60-3 Regenerative Blower
Unit is capable of 294 CFM at open air flow
Max pressure - 130 H2O
16570

[Brady Watson]

Looks like an OK unit - It moves a lot of air, and maxes out around 9.5" Hg. This is equivalent to 4 new Lighthouse motors (<$500 total), but it will last much longer than the LH motors in the long run. It is well within the usable specs for CNC vacuum...I wouldn't spend more than $1000 on it.

-B