camtech CNC router

[tomp]

Anyone can help me to find out the motors diagram of Camtech CNC. I want to convert it in Mach3 and Gecko drive but I can't find any information of motors online at all.
Thank you for all your help.
Tom.

[CNYDWW]

Morning,

This really isn't the place to find that kind of info. This is for ShopBot CNC Routers. Best place would be to ask on CNCZone.com. It's not so limited and you're more likely to get a much better response.

Regards
Randy

[tomp]

I've tried every where is possible, it posted on CNC zone as well.
Thank you,
Tom

[ssflyer]

What motors? Stepper or server? Can you supply the motor info? The motors are pretty standard as far as wiring, but depends on the number of wires they have...

[danhamm]

Yes, what motors does it have, I have worked on a friends Camtech 5/52
It didnt have a control box.
He bought it on craigslist his has pk296 01a on it. its running om mach3 now.

[tomp]

Ron,
Here is the motor of Camtech CNC I just took.
Thank you for your help.
Tom,

[CNYDWW]

That is a standard stepper motor and should wire up step and direction to stepper drivers and so on down the line to mach3

[Brady Watson]

Those are old 'can' style steppers...complete power hogs. Those motors draw 7.5 Amps (!) - You might want to replace it with something more modern, which would let you have more choice of motor drivers etc.

-B