Screw and allen wrench sizes

[kevin_reid]

I dropped the screw that goes through the side of my router mount to ground the router case (prt with pc router). Anyone know the size? I put in what I thought was a 10-32 screw, but it was loose.
Also, the gear on my z axis motor has come loose, and I cant easily reach it. Anyone know what size allen wrench fits this? Thanks!!!

Kevin

[Brady Watson]

Hex size on the Z axis grub screw is 1/8". It's best to take the T-rail completely off (you can leave router on it). You'll need to remove the stop bolt to get it off & pull it down, at the just beyond the edge of the table to clear. If it is loose, go buy some loctite and really crank it on there.

-B

[kevin_reid]

Thanks Brady. Actually I can come straight down from the top of the z, with an allen made to a socket head and a long extension. Ill pick up one this afternoon. Thanks!!.

Kevin