great price on 0-flute bits.

[knight_toolworks]

though these are a bit odd in size and length for thin material they should be great. when my regular 0-flute breaks I will try them out. the price is hard to pass up. the seller has a bunch of straight bits and vee's too right now.
http://www.ebay.com/itm/63-862E-Onsrud-Cutter-3mm-Single-Edge-Solid-Carbide-Upcut-O-Flute-Bit-3-pack-/380634829060?pt=LH_DefaultDomain_0&hash=item589f9a9104

[steve_g]

Shhhhhh Steve...

The more people that know about this source, the faster they sell! This seller is my best supplier. His offerings go fast! I check several times a day for new ones.

SG

[knight_toolworks]

lately the offerings have been not so good. nothing much I need unless you buy them all (G)

[Bob Eustace]

Bit of a bummer though for us Aussies as he says he ships worldwide BUT excludes Europe, Africa, Asia and Oz!

[kurt_rose]

Thanks Steve. I just ordered up a couple. They'll be perfect for a job I have coming up shortly.

[Shane]

I've bought hundreds of bits from them off ebay. And being in Australia I get around the postage issue by using Shipito. At one stage I was able to get solid carbide spiral downcut 7/32 bits for $4 each :D

[coryatjohn]

Are they selling some sort of surplus? How can the price be that low? Are there any issues with quality?

[garyb]

John, they are overruns mostly from specials that the factory clears
there's nothing wrong with the tooling.......just mostly odd sizes
Gary

[Brady Watson]

Make sure you bargain hunters REMEMBER that they are odd sized etc. I don't want to see you posting that your parts are suddenly +/- spec because the tool is not defined correctly in your tool database or you pulled the wrong size from the bin.

As they say, everything has a price...'Bargain' is all relative.

-B

[Bob Eustace]

I've bought hundreds of bits from them off ebay. And being in Australia I get around the postage issue by using Shipito. At one stage I was able to get solid carbide spiral downcut 7/32 bits for $4 each :D

Chrissy wrote a nice note to the seller and yes he is posting to us in Oz! We use MyUs for shipping but its far easier to get stuff without the middleman.

[Shane]

Make sure you bargain hunters REMEMBER that they are odd sized etc. I don't want to see you posting that your parts are suddenly +/- spec because the tool is not defined correctly in your tool database or you pulled the wrong size from the bin.

As they say, everything has a price...'Bargain' is all relative.

-B

That sounds like something a parent would say to their child when purchasing their first car. I'm pretty sure we are not all naive teenagers and know that Onsrud are listing them due to various reasons like odd sizing (which they clearly state in the description). If it was an unknown business listing them cheaply I would be more cautious but because it is Onsrud I feel more than confident the product I'm getting is up to quality standards.

Due to how many 7/32 bits I've bought (all on a 1/4 shank), I now cut the majority of my wood based on those specs. I know at the end of the day that purchasing them saved me thousands of dollars and that I got a 'Bargain' from my smart move. Why pay full price when some of these Onsrud bits will perform just as good if not better at a much cheaper price?

Shane.

[Brady Watson]

Shane,
I occasionally mix a little sarcasm along with the knowledge I share for nothing...What kind of friend would I be if I didn't? :)

I've gone out to diagnose & machines that were 'cutting oversize' or 'undersize' - only to find that they didn't have the tool defined correctly or inadvertently grabbed the wrong diameter bit. This has happened more than once. Some shops have bits resharpened and have sloppy habits when it comes to keeping track of their resharpened bits. Hence, sometimes off sizes or resharpened bits, when running production, are a false economy - unless you are strict about cataloging your tools.

Your situation is probably different if you have all the control and don't have employees, and are organized enough to know for sure what you are putting in the spindle. There is certainly nothing wrong with paying less for the same product - especially consumables like bits ;)

-B

[Shane]

No worries Brady :) Sorry I must of read your post a different way and missed the sarcasm. I guess us Aussies are currently pretty sensitive on pricing. As we seem to get price gouged by overseas companies a lot and we usually resort to using freight forwarders etc to avoid paying the huge mark ups.

Oh and I once looked at resharpening my bits in Australia. I soon quickly forgot that idea when I was quoted at least $19 a bit to have them resharpened. Cheaper and quicker to buy brand new bits from America.

Shane.

[knight_toolworks]

You do need a metric collet for those bits I posted. the 1/4" collet will not tight up. but it is still cheaper so not a big deal.

[steve_g]

http://www.elairecorp.com/portercablecollets.html?gclid=CMuL9ciEircCFYYw4Aod YFQAzw

[myxpykalix]

I occasionally mix a little sarcasm along with the knowledge I share for nothing...What kind of friend would I be if I didn't?

That's why we like you!:rolleyes:

[coryatjohn]

I ended up buying a number of bits from this supplier. One of them, a 3mm super O single flute cutter (sort of a 1/4" shank) I used with great success yesterday cutting 6061 T1 aluminum.

I was making some very small parts (less than 1" and 1/16" thick) that required high accuracy. I tried first with a 1/8" double flute upcut but that bit got fouled badly and did a really poor job. The second bit I tried was one of the "eBay bits" and it did a lot better. What really surprised me is the sound the bit made while cutting. It was more of a low purr than a high squeal like the double flute bit made. There was very little bit deflection thanks to the 1/4" shank.

I used .003 as the chip load which resulted in .7 in/sec. I used .6 in/sec, 14k rpm to up the quality of the cut and of course, ramped everything. The bit was clean after the cuts and cool to the touch. Excellent, especially considering the bit was less than $3.

[coryatjohn]

Missed the 10 minute edit rule...

Here's a picture:
http://www.usnaviguide.com/shopbot/glass-mount.jpg