HSD 27mm shaft wrench

[WMNH]

Does anyone know where I can get a shaft wrench for my HSD spindle? I can't seem to find any with online searches. I guess if I can't find one I could grind down a standard wrench.

[ron_moorehead]

I did a web search for 27 mm wrench and found a lot on Amazon, eBay, and the good old place Sears.

[WMNH]

Plenty of standard wrenchs out there.....problem is they are 3/8 or more in thickness. The wrench flats in the HSD spindle are only about .250 wide. I can certainly grind down the thickness of a standard wrench and make it work but I was hoping to find a replacement HSD wrench.

[coryatjohn]

I hate to ask but I just have to. What happened to the original?

[WMNH]

Previous owner neglected to provide it.

[ron_moorehead]

Call ShopBot they will sell you a wrench.

[ron_moorehead]

Here is a web site with wrench for spindles


http://www.woodworkerswholesale.com/Collet_Wrenches_s/1637.htm

[srwtlc]

USAG 248 27mm

http://www.usag.it/catalog/en/products/details/648/248/Single_ended_open_jaw_wrenches

http://www.bloomertool.com/DIN-894-Single-Ended-Open-End-Wrenches.html

http://www.ebay.com/itm/Beta-Tools-52-27mm-Open-End-Spanner-Wrench-Chrome-Plated-/290921075866?pt=UK_Hand_Tools_Equipment&hash=item43bc3f549a

Or, Shopbot sells replacements also. ;)

[coryatjohn]

Previous owner neglected to provide it.

I guess I was hoping for a "forgot to take it off and it shot out the window and stuck into my neighbor's back. The police won't give it back as it's evidence."

[WMNH]

Thanks guys, I'll check these links out. I've also emailed SB.

[WMNH]

I guess I was hoping for a "forgot to take it off and it shot out the window and stuck into my neighbor's back. The police won't give it back as it's evidence."

John, that's a much better excuse maybe I should use that instead.

Thanks Again All!