View Full Version : been a while...
since I've posted any fotos... the pr is still running strong, here it is cutting pvc letters with Bryan at the controls
kurt_rose
06-14-2013, 11:02 AM
Takes a licking and keeps on ticking! :D Keep the posts coming Gene. Always inspiring.
how is that other router doing ?
how is that other router doing ?
both machines rock!!!
first of 240 to cut 700mm x 700mm x 18mm mdf
day 4, 10 panels completed 2 on the tables, 48 to go, been running 24 hrs 4 days, pr and other machine pumping it out.
another example of how to make $ with a bot and it's a pr hybrid! :p
another panel, 1st of 7 for a bed frame
speaker panels from 7mm sapele
headboard parts cut on both machines
how much sanding did you do on the panels with all the cutouts ?
maybe 5 mins total each panel 3mm downshear end mill offset pocket cut full depth ran it slow .5ips xyz tried to go faster bits kept breaking sapele cuts very clean 5" orbital on downside quick pass with 3" 120g radial disc and done
the pr cutting cab parts...still amazed at what this thing does with accuracy
the panels on the left other machine, panels on the right the pr. other shop fabbing complete unit
MogulTx
09-22-2013, 12:55 AM
That for a confessional, Gene? Reminds me of some of the booths I have been in to.....
That for a confessional, Gene? Reminds me of some of the booths I have been in to.....
private residence, 20 sets of these doors. 320 panels to cut.
You do some amazing work . Thanks for the pictures:)
window panels, each opening will have a different color of glass. 26 sets to cut.
mikeacg
09-27-2013, 09:00 AM
Looking good Gene!
Mike
What size bit did you use to cut the one on the right , it has very sharp inside corners . Also the feed an speeds PLEEZE:D
What size bit did you use to cut the one on the right , it has very sharp inside corners . Also the feed an speeds PLEEZE:D
blanks 19.45mm thick 2 passes, 6.2mm endmill (LH flutes inside profile with .3mm offset) follow up profile 3mm endmill inside profile no offset 3 pass
6.2 bit speed 80mm/sec xy 60mm/sec z 3mm endmill 60mm/sec xy 40mm/sec z
angles with .875 diam, 89.5 deg v bit 6.5 mm depth 80mm/sec xy 60mm/sec z
23-26 of 48...pr running strong
pr continues to cut product. builder has added another order of panels...pr has been running 12-18 hrs a day for over a month
mikeacg
10-13-2013, 07:13 PM
Music to my ears, Gene! I hope to get my new shop up in the spring and try to get my old PR running again!
Good to see you staying so busy!
Mike
Would the builder mind if you could post a photo of the panels installed and finished . That would be great to see the finished product:)
install photo soon, here is a shot of glass prior to blank glue up
genek
10-14-2013, 04:15 PM
Nice how are you going to glue the glass in place or are you filling with something.
like the looks.
I cant wait to see them done with light coming from behind them. is the glass going to be sandwiched between the frames?
door panels ready for delivery, half of which were cut by the pr that refuses to be outdone by the other machine...
myxpykalix
10-20-2013, 08:40 PM
hey Gene,
in this last picture is that a round column behind the chair in the picture?
How's the kids doing?:)
steve_g
10-21-2013, 10:22 PM
Gene...
How longs it been? last time, I changed mine mid file without loosing X,Y, or even Z! 30 min. later I resumed without issue!
SG
just over 8 months...45 mins to change and back to pumping out panels!
myxpykalix
10-22-2013, 03:56 PM
Gene,
Did you get your certification to be a SMT:confused:
Shopbot Mechanical Technician :eek:
full recovery...Jack, something like that
new home is waiting for the pr...
myxpykalix
10-29-2013, 05:03 AM
Looks like business is good:eek: Good for you Gene..:D
David Iannone
10-29-2013, 11:32 PM
Nice building. Is that where you are dumping all you saw dust bags?:D
myxpykalix
11-01-2013, 02:36 AM
Gene,
I really feel sorry for you having to face this dilema...:confused:
...having to figure out what new tools you could buy to try to fill up all that space:eek: (some people just have more of a burden in life then others...):rolleyes:
pr ready to cut...16 sheets 2d window panel design
chiloquinruss
12-05-2013, 02:34 PM
Congrats on the new digs, it looks just terrific. All it needs now is a little sawdust on the floor and it'll look like a real shop! :D So how soon to see some project pix? Russ
window panels...15 sheets to go 2.5 hrs sheet $225 sheet :) for another shop
Brady Watson
12-05-2013, 10:34 PM
...for another shop
atta boy, Gene :D
-B
keep going like that and we will see a 3rd cnc . keep up the good work:)
How would you rate the pr to the other machine in terms of speed and accuracy?
both machines rock !! the pr refuses to be outdone and the china machine has been a serious workhorse...I don't really compare the two, each has it's own function
myxpykalix
12-07-2013, 07:19 AM
Gene i'm glad to see that you seem to have a steady stream of business ans are constantly working, so good for you:D
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.