Need some small metal parts plasma or laser cut

[zeykr]

I have a small job for someone with a plasma, waterjet, or metal cutting laser.

These are brackets for a folding chair someone has asked me to reproduce. They need to be thin and stiff, non flexible. The current ones are about 1/16th thick, but could be thicker. I need 24 or maybe 48 sets depending on the cost.

Stainless would be nice, but steel will work too. Open to suggestions.

You can PM me through the forum.

Thanks

[genek]

Mr. Zey try this folks they are in Ky. but they are juried artist and do that kind of work.
karine@maynardstudios.com (http://us-mg5.mail.yahoo.com/yab-fe/mu/MainView?.src=neo&themeName=blue&bn=50_11&s=0&isFresh=1&bucketId=CMUSCVAPC2&stab=1372987628706#)Mobile:502.859.3170 (http://us-mg5.mail.yahoo.com/yab-fe/mu/MainView?.src=neo&themeName=blue&bn=50_11&s=0&isFresh=1&bucketId=CMUSCVAPC2&stab=1372987628706#)