cabinet door moulding

[randydimmette]

trying to semi match cabinet door moulding. will be straight sticks approx 1/2" high on outside and 1/4" thick on inside using aspire but don't know how to make shape

[gc3]

http://www.4m3d.com/

[myxpykalix]

First thing i would do is get a better picture, as that is very hard to see any detail. Then i'd go to a place like http://archive3d.net/?category=445&page=1
and look at their rosettes and decorative flourishes and see if you can see components that might match parts that you are trying to emulate and download them and see if you can use parts to build what you want.:D

[randydimmette]

thanks, you guys are a lot of help. this forum is great

[kurt_rose]

You could also contact Brady on this forum and have him laser scan it for you.