GeneMpls
08-03-2013, 02:40 PM
If any of you are using a Chinese spindle (mine is HuanYang) and have
figured out how to turn it (and the cooler) on from SBot and / or have
an automated warmup routine- please share. I have the 10k pot installed
and it runs and sounds good- and added a longer wire (ribbon) so that
the snap-out control panel can be remote mounted. Let me know if you
would like part numbers- takes 10 minutes. Thanks Gene
figured out how to turn it (and the cooler) on from SBot and / or have
an automated warmup routine- please share. I have the 10k pot installed
and it runs and sounds good- and added a longer wire (ribbon) so that
the snap-out control panel can be remote mounted. Let me know if you
would like part numbers- takes 10 minutes. Thanks Gene