Foam Gear

[Brian Harnett]

I made this after seeing one in the creative cnc forum my gear is smaller 23" in diameter we have an antique machinery show I go to so it will be interesting to bring it along. Its standard 2" insulation foam

Ended up making two, the first I put some minwax stain on which I have done in the past without issue but I put it outside and forgot about it, minwax stain and sun react with foam as I found out, though it kind of looks like it was buried for a hundred years, so a second was made I used a torch very lightly to make the edges pitted and worn.

On the second gear I used Flood waterbased deck and siding preservative mixed with powdered concrete pigment ( black and brown at home depot ) applied with a critter spray gun, gave it a second misting with just the brown for the rust effect, I also sprinkled iron filings in the finish be interesting to see what happens.

I put Sullivan iron works on it because we live in Sullivan county

http://i.imgur.com/ZeRHUZQ.jpg

http://i.imgur.com/r6BUKRK.jpg

http://i.imgur.com/cMUjzg8.jpg


The melted up Minwax one.

http://i.imgur.com/REGfE4L.jpg

[scottp55]

Brian, nice job. If you had told me the melted one it came from the "Allagash trains" , I would have believed you.

[myxpykalix]

Brian,
The second one looks the best...(or is it the worst), which make it the best?:confused: Anyway it looks the most realistic

What you need to do is take both of those to this show and cart them in on some type of material cart as if they are very heavy pieces then ask for help picking them up....:eek:
I like that you have all these "recipes" in your head for these various finishes. They both are very cool but #2 looks like it's been sitting outside for 100 years:D

When people ask you who Sullivan Ironworks is, tell them it is owned by a conglomorate known as "Harnett Iron "Forgery" (get it?:eek:)

[Bob Eustace]

Another Brian masterpiece!

[genek]

Brian very nice jog... should catch some eyes when they pick it up and it weighs near nothing.

[Brady Watson]

Pretty cool, Brian. If you want a more realistic rusty steel look, I'd recommend Sculpt Nouveau Iron B. On the last coat (while wet) spritz on some Tiffany Green patina & watch the magic happen. It is uncanny. I'm pretty sure the Complete Sculptor stocks it in NYC.

-B

[dan_nelson]

I like the first one the best what color minwax was that you used? So you put it on the foam and just let it dry no ragging off the extra? Pretty cool I want to cut one today.

[kurt_rose]

Very very cool Brian. I haven't tried the Iron B yet Brady but that's gonna change today. Took your advise and got it from the Complete Sculptor. Sure beats waiting for it to come clear cross country. UPS says it's out for delivery.:D

[kurt_rose]

I just noticed the last picture and how you left part of the keyway there. Nice touch!

[Brian Harnett]

I like the first one the best what color minwax was that you used? So you put it on the foam and just let it dry no ragging off the extra? Pretty cool I want to cut one today.

Dan I used Minwax red Oak but it needs to be in the sun I have used it on foam before but it takes days to dry in the shop but will not eat the foam, I was impatient and wanted to hurry it along and thats when it happened it was around 45 min or an hour. the stain was sprayed on. I did spray brown concrete pigment mixed with clear acrylic after it was hard for rust highlights.

Brady. I will have to check out that paint if I get into it more this was just a fun diversion from my regular workload, though I am curious to see if the iron I added will oxidize in time.