7.2 unit values?

[Stagecraft]

Upgraded our PRT Alpha with new Vexta drives and motors last fall.
Due to crash I need to reset unit values and I can't seem to get any of the ones in the Shopbot Wiki to work spot-on.
We're running 30 tooth gears with 7.2 motors...suggestions?

[srwtlc]

How about the 'ShopBot_PRT96x48alpha7_2.sbd' unit values. Should also be the same as the PRS Alpha ones. These can be found in either 'C:\Program Files (x86)\ShopBot\ShopBot 3\Settings' or 'C:\ProgramData\ShopBot\ShopBot 3\Settings', depending on your OS and SB3 version, or they can be loaded with a UR reset.

[Stagecraft]

Thanks Scott, got the unit values nailed down but of course another problem...
I'm cutting a multiple pass V-carve oval shap. The cutter makes the first pass depth just as it should but when it moves on to the second depth the cutter is cutting about 4" above where it should if measured along the Y axis. Possible multiplier out of whack?

[srwtlc]

Boyd,

Your res multipliers should all be '5' unless you have something different with your controller/drivers than what a current Alpha is.