mikeb
11-08-2013, 01:08 PM
In the midst of rewiring the control box on my standard (circa 2010) from 110 ( router) to 220 (spindle). Knowing I was eventually going to get the spindle I purchased the 220 contacter when I purchased the shopbot. the contactor came with 3 black wires already attached , 1 @ 1L1, 1 @5L3 and 1 @3L2. The docs don"t mention a wire at the 3L2 position on the contact. just wondering if it was mistakenly put on at shopbot or I'm missing something in the docs. Hooking up a 2.2 spindle single phase on a standard. Mike