TJ
11-18-2013, 09:06 AM
It's TJ here from ShopBot, I hope everyone is gearing up for the holiday season. One of the great things about having a ShopBot is once it is up and running there is not much attention needed to keep it running accurately. However, there are a couple daily and quarterly maintenance areas that could use some attention to keep their machine in the best shape possible. During this training I will demonstrate how to clean your tool, check machine for square, change out a set of pinions and other useful tips. This will be demonstrated on a current PRS ShopBot, but the information will still be valuable to anyone with an older PRT ShopBot.
As usual, this will be recorded and the video and files will be posted for users to see at a later date.
Hope to see you there this Wednesday November 20th at 1:00pm EDT
Thanks, TJ
1. Please join my meeting.
https://global.gotomeeting.com/join/466561117
2. Use your microphone and speakers (VoIP) - a headset is recommended.
Or, call in using your telephone.
Dial +1 (312) 878-3078
Access Code: 466-561-117
Audio PIN: Shown after joining the meeting
Meeting ID: 466-561-117
As usual, this will be recorded and the video and files will be posted for users to see at a later date.
Hope to see you there this Wednesday November 20th at 1:00pm EDT
Thanks, TJ
1. Please join my meeting.
https://global.gotomeeting.com/join/466561117
2. Use your microphone and speakers (VoIP) - a headset is recommended.
Or, call in using your telephone.
Dial +1 (312) 878-3078
Access Code: 466-561-117
Audio PIN: Shown after joining the meeting
Meeting ID: 466-561-117