Part orientation

[David White]

I just replaced the bot PC and now I am having a problem with my part location . That is to say when I draw my part I want to cut, say at 12x and 12y the bot wants to cut it at 84x and 36y . I think it is a simple thing but I just can figure it out. Thanks for your hellp.

[adrianm]

Loaded the correct settings with UR and done a C3?

[David White]

When I c3 it zeros in the correct corner of the bot . Not sure what ur is.
Thanks for your help

[ken_rychlik]

in your part file under material set up make sure origin offset is not checked

[David White]

Thanks for all your hellp I figured it out.