bowl for fund raiser

[Ajcoholic]

There is an organisation here in my city that has a yearly fundraiser to help feed the homeless. The premise is to "fill the bowl" - and they have an auction which in the past was mainly pottery and ceramics - where local artists would make and donate a bowl, and local chefs would make a stew or soup and then the sell them off.

They are trying to broaden the idea, and I was asked if I'd be interested in donating a bowl or two for the event.

This gave me a chance to try an idea I have had in my head for a while. I used the SHopbot to carve out a rectangular vessel in a hunk of 7" by 12" by 3" walnut. Then, I hand carved the exterior, leaving it rough from the gouge, and sanded the inside smooth. I textured the perimeter of the top edge with a hand punch.

WIll be oiling it over the next few weeks, first coat on today.

http://i83.photobucket.com/albums/j307/ajcoholic/IMG_1552_zps34235092.jpg (http://s83.photobucket.com/user/ajcoholic/media/IMG_1552_zps34235092.jpg.html)

http://i83.photobucket.com/albums/j307/ajcoholic/IMG_1555_zps00e4e487.jpg (http://s83.photobucket.com/user/ajcoholic/media/IMG_1555_zps00e4e487.jpg.html)

http://i83.photobucket.com/albums/j307/ajcoholic/IMG_1562_zpsac022f9b.jpg (http://s83.photobucket.com/user/ajcoholic/media/IMG_1562_zpsac022f9b.jpg.html)

[Ajcoholic]

http://i83.photobucket.com/albums/j307/ajcoholic/IMG_1560_zps29ec9403.jpg (http://s83.photobucket.com/user/ajcoholic/media/IMG_1560_zps29ec9403.jpg.html)

http://i83.photobucket.com/albums/j307/ajcoholic/IMG_1566_zpsdd24794d.jpg (http://s83.photobucket.com/user/ajcoholic/media/IMG_1566_zpsdd24794d.jpg.html)

http://i83.photobucket.com/albums/j307/ajcoholic/IMG_1567_zps9be6f17e.jpg (http://s83.photobucket.com/user/ajcoholic/media/IMG_1567_zps9be6f17e.jpg.html)

[bleeth]

Looks like a pretty cool vanity bowl to me!

[Ajcoholic]

Looks like a pretty cool vanity bowl to me!

If it were larger... sure!

I was just able to get this cut on my Buddy. If I were going to cut a vanity bowl, I would say 5 inches height would be necessary (based on the china ones I have used) and I'd have to clamp the material directly to the powerstick, as the 1 1/2" board on top takes up too much space.

This cut remarkably quickly. ROughed with a 1/2" endmill, and finished with a 5/8" round end mill, set at 3% step over, running at 360 IMP I think the roughing was about 10 minutes, finsihing about 13.

[Ajcoholic]

I wanted to do one more bowl for the event, from a piece of 12" 8/4 curly maple.

Although I like turning on the lathe, I wanted to try a bowl on the CNC router for a while now... here was a good chance.

I did the files in literally a few minutes (thanks Aspire!) and cut it out in about 15. Did the concave side first, flipped it over and did the bottom and the rim.

AJC

http://i83.photobucket.com/albums/j307/ajcoholic/IMG_1576_zpsca28e773.jpg (http://s83.photobucket.com/user/ajcoholic/media/IMG_1576_zpsca28e773.jpg.html)

http://i83.photobucket.com/albums/j307/ajcoholic/IMG_1577_zps22595bb3.jpg (http://s83.photobucket.com/user/ajcoholic/media/IMG_1577_zps22595bb3.jpg.html)

http://i83.photobucket.com/albums/j307/ajcoholic/IMG_1575_zpsceb85709.jpg (http://s83.photobucket.com/user/ajcoholic/media/IMG_1575_zpsceb85709.jpg.html)

[srwtlc]

Nice stuff. Bowls and platters are kind of fun to design and make with the bot.

[Ajcoholic]

Nice stuff. Bowls and platters are kind of fun to design and make with the bot.

Well it only took me two years... ;)

I guess Im just too damn busy working to "play around"... this was a good excuse to make a few things. And they hopefully will raise a few dollars for the organisation.