Control Software 3.8.12

[Howley]

I've just installed 3.8.12.

I had issues with 3.8.8 so I went back to 3.6.46.

So far so good..... Ran a couple files, no freezing up, no erratic behavior.

I have a PRS standard 96/48/6 w/router Windows7 home on a core2duo 4gb.

You can no longer C6 or C7 to toggle router/spindle, tech support says its a new safety feature, although when I C6 the router comes on for 1 second then immediately shuts off...odd. I liked having control over c6 & c7. It allowed me to test the router before starting a big job. You can keypad, then output #1 button to toggle the router, just not sure how that is safer?

Just trying to help our friends at Shopbot!
PS Their tech support is awesome!

Any feedback from other users.....Good?, .........Bad?

[Joe Porter]

I have 3.8.12 and so far, so good...joe

[ajf]

Did you have to make any changes to the default settings once it was installed and up and running.

[Howley]

Nope,
I uninstall 3.6.46
Installed 3.8.12
Reset defaults ( as suggested by shopbot)
Picked my machine.
Turned on limit switches ( not sure why that defaults as off? )

That's it, didn't have to change anything else.

[khaos]

Howley, Can you Alt-1 to switch on your cutter?