TJ
02-24-2014, 08:41 AM
Hello everyone,
There will be an online training this Wednesday 2/26/14 at 1:00pm EST teaching how to create a custom vacuum fixture. Using a $100-$300 vacuum pump we will create a gasketed jig for cutting out small parts that do not have any hold down besides the vacuum. We will look at the files for creating this fixture then watch it be cut on the ShopBot and then cut parts out using the new fixture. This will be recorded and the files will be available for later viewing.
Hope you can join us, this has been a highly requested topic and I feel it can be used for so many different applications on ShopBots of all sizes.
Thanks, TJ
1. Please join my meeting.
https://global.gotomeeting.com/join/881701861
2. Use your microphone and speakers (VoIP) - a headset is recommended. Or, call in using your telephone.
Dial +1 (213) 289-0012
Access Code: 881-701-861
Audio PIN: Shown after joining the meeting
Meeting ID: 881-701-861
GoToMeeting®
Online Meetings Made Easy®
There will be an online training this Wednesday 2/26/14 at 1:00pm EST teaching how to create a custom vacuum fixture. Using a $100-$300 vacuum pump we will create a gasketed jig for cutting out small parts that do not have any hold down besides the vacuum. We will look at the files for creating this fixture then watch it be cut on the ShopBot and then cut parts out using the new fixture. This will be recorded and the files will be available for later viewing.
Hope you can join us, this has been a highly requested topic and I feel it can be used for so many different applications on ShopBots of all sizes.
Thanks, TJ
1. Please join my meeting.
https://global.gotomeeting.com/join/881701861
2. Use your microphone and speakers (VoIP) - a headset is recommended. Or, call in using your telephone.
Dial +1 (213) 289-0012
Access Code: 881-701-861
Audio PIN: Shown after joining the meeting
Meeting ID: 881-701-861
GoToMeeting®
Online Meetings Made Easy®